1. Does the cutter need to use abrasives? What is the type of abrasive?
Re: normally we use pure water for robot waterjet cutting But for the most accurate results, you can send us samples for trial cutting 2. Send a list of consumable equipment
3.Calculate production time of 1 product (seconds/product)
Re: I need to know where in the workpiece I need to cut, and I need to know the dimensions of those locations It is better to send samples
4. Send a list of equipment brands.
Re: ABB or FANUC, YASKAWA robot and so on，others all winwin brand.
5. How to replace the mold? Will you pre-program it so you can use multiple molds on the machine?
Re: Programming and mold are outside the scope of the waterjet cutting projects we offer. Mold need to be made by a mold company Programming requires customers to operate it themselves
6. What is the product profile tolerance after cutting?
Re: Waterjet cutting tolerance ±1mm(Because there may be errors in manual feeding)
No. | Question |
| 1 | How to program ABB robots according to product profiles? You use ABB Studio or SprutCAM software for programming |
| 2 | I find your robot is not suitable for cutting function. Have you ever used it to cut? Please contact ABB robot to choose the suitable |
| 3 | Turntable equipment also works in dust and water environments, but it is unclear whether it is dust and water resistant. The solution needs to be clearly shown |
| 4 | The turntable uses servo motors, right? Which brand of Servo motor do you use? |
| 5 | Send me a list of devices and brands of each device in this system. |
| 6 | What is the cutting tolerance? |
| 7 | Send List of consumable equipment |
| 8 | When cutting 3D products on the above material, water pressure can be applied at about 50,000-60,000psi: there will be very loud noise and water jets will shoot in all directions into the cutting room. So how are the plans for noise protection, soundproofing, and waste water collection of the cutting room implemented? Need a solution for further discussion. |
| 9 | This high pressure pumping device uses a dual pump set (2 pressure pumps operating in parallel); or single pump and have to invest in 2 sets of compressors, because if using 1 high pressure pump, it will not be enough to supply water flowrate to 2 robot arms at the same time when cutting at high pressure. |
If you want to know more about these issues, please contact us for consultation.
Contact: Sunny Lee
Phone: +86 18640550523
Tel: +86 15802487169
Email: info@waterjetsupplier.com
Add: Pacific Industrial City 67-32, Shenbei Dist, Shenyang, Liaoning 110001. P. R. China
We chat
English
